Skip to main content
Declared motion covered so much of the frame at a cue that verify measured less of the picture than usual. This finding is a warning, and DeckTalk judges it itself. decktalk verify reports it when it measures the finished film and reads back each recording log. Pass --allow MOTION_MASK_LARGE to carry on past it, and --fail-on to choose which severity fails a run. The settings that move this verdict are verify.motion_mask_max_percent.

​
What to do

Make the moving thing smaller, or move the cue away from it, so the reveal is judged on more of the picture. Troubleshooting says more under A motion verify cannot measure.